Nitrile For Electrical Transformers
Maximum quality Nitrile regarding its mechanical properties and resistance to oils and grease.
Excellent to manufacture all type of gaskets and flanges that are in contact with the oil in distribution and power transformers
Excellent weather aging-resistance, complies with the standards required by transformer manufacturers, useful in automobile gaskets.
Physical and chemical properties: Nitrile For Electrical Transformers
- Shore “A” hardness: 60-65; 70-75
- Tensile strength, minimal: 1200 PSI
- Elongation, minimal: 550; 450 %
- Temperature Range: -13°F to 248°F
- Oils: Excellent
- Acids: Medium
- Outdoors: Good
- Abrasion: Good
This transformer grade Nitrile is used in Mexico to manufacture gaskets for distribution and power transformers, so it must meet the chemical and mechanical requirements of the Federal Electricity Commission (CFE) to tolerate weathering, abrasion, and acids, as well as excellent resistance to the oil used in their transformers.
Product Dimensions
- Plate: 3'3" x 3'3", 1/16" to 1" thickness
- Sheets: 3'3" x 32'9 " long, with 1/16" to 5/16" thickness
- Sheets: 3'3" x 16'4" long, with 3/8" to 5/8" thickness
Transformer grade nitrile of the highest quality due to its mechanical properties and resistance to oils, greases, hydrocarbons and excellent for making all types of gaskets and flanges that are in contact with the oil of distribution and power transformers; excellent resistance to environmental aging, meets the standards required by manufacturers of transformers, this type of rubber is also useful in automotive gaskets.
Applications:
Used to pack transformers, transformer gaskets that comply with the standard established by the Comisión Federal de Electricidad in Mexico.
